Looking for an easy and economical way to cut glass bottles? This glass bottle cutter from DIY Kits makes simple work of cutting a wide range of bottles. You can create your own drinking glasses, light fittings, vases, mosaics or anything you put your mind to.

DIY KITS BONUS 1: includes 4 grades of sandpaper. Once your bottle is cut, you are left with a sharp edge that needs to be sanded. For best results, start with a coarse grade, then move to a medium grit, then a fine grit and finish with ultra fine. Our kit includes these 4 grades of high quality wet/dry sandpaper which saves you around $5.00!

DIY KITS BONUS 2: includes 2 Corona salt and pepper bottle caps. Grab a couple of empty Corona bottles, fill one with salt, one with pepper, stick our caps on top and you’ve got a great talking point for your next party. Makes a wonderful gift and you can get more caps in our eBay store. Valued at $5.99!

THESE TWO BONUS ITEMS ARE VALUED AT AROUND $11.00!

Features

Easy to create a score line that joins up every time
Cuts a wide range of bottle sizes – see photos
Cuts bottles with thicknesses from 2mm to 8mm
Rubber feet keep the cutter in place

Kit Contents

Glass bottle cutter
Allen key to adjust for different sizes of bottles
2 sided instruction sheet
4 grades of wet/dry sandpaper (coarse, medium, fine, ultra-fine)
2 Corona salt and pepper bottle caps

How to Use

Score
Split
Sand

Using the glass bottle cutter is easy. Just adjust the size so the cutter sits on the bottle at your desired position. Then press firmly and rotate the bottle until a score line is made around the circumference. Now shock the score line by alternating between extreme heat and extreme cold. There are a couple of ways to do this. The easiest way is to dip the bottle in simmering water for a few seconds and then dip it in ice cold water. Do this a few times and the bottle will come apart at the score line. If you intend to use the bottle as a drinking glass, finish by using wet and dry sandpaper to sand down the rim at the top, inside and outside.

FAQs

How long do the cutters last?
The manufacturer rates the cutters at 10,000 hours. There are three cutters on the wheel. So if you feel it is becoming less effective, you can loosen the cutting wheel using the supplied Allen key and rotate it to the next cutter. Of course the exact lifetime will vary depending on how hard you press, but it is likely that you will be able to cut hundreds, if not thousands, of bottles.
How easy is it to use?
Like any DIY product, there is skill involved. Start by practising ona few unwanted bottles. If you’re not confident, just go in with the attitude that you’ll probably mess it up! Then once you’ve done your first, however badly, you’ll have a lot more confidence for the next one. After you’ve done three, you should have a pretty good feel for the process. There are two main challenges. The first is getting the score line to join. This cutter is the best I have seen at achieving this requirement. Just applysome even pressure as you cut, so the baseof the bottle is always hard up against the back of the cutter. The second issue is achieving a break. This just takes some time and patience. The first time you do this it might seem like it will never happen. Give it some time and it will eventually break.
Is it safe to use?
Well you are working with glass and you shouldconsider your own DIY experience before starting. It is a straight-forward process, but if you were to do something like apply a huge amount of pressure while cutting or run your finger over a freshly cut top, then there will be blood. Wearing gloves is a good idea.
Do you recommend it for kids?
My kids? No. Your kids? Possibly. I’d say high school age at a minimum. The initial scoring stage is pretty easy, but stick some gloves on them, just in case. If boys object to gloves, just tell them they’re about to do something dangerous. They’ll like that. Our recommended breaking method involves hot water on a stove top, so use your judgement if this is appropriate for your kids. Also keep in mind that when the bottle does break, the edges can be quite sharp. Don’t let them touch the edge until it has been sanded.

Welcome